cutlass/test/unit/gemm/warp/wmma_sm72.cu

/***************************************************************************************************
 * Copyright (c) 2017-2021, NVIDIA CORPORATION.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification, are permitted
 * provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright notice, this list of
 *       conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright notice, this list of
 *       conditions and the following disclaimer in the documentation and/or other materials
 *       provided with the distribution.
 *     * Neither the name of the NVIDIA CORPORATION nor the names of its contributors may be used
 *       to endorse or promote products derived from this software without specific prior written
 *       permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 **************************************************************************************************/
/*! \file 

    \brief Unit tests for thread-level GEMM
*/
#include "cutlass/arch/wmma.h"

#if defined(CUTLASS_ARCH_WMMA_SM72_ENABLED)

#include "../../common/cutlass_unit_test.h"

#include "cutlass/aligned_buffer.h"
#include "cutlass/half.h"

#include "cutlass/gemm/warp/default_mma_wmma_tensor_op.h"

#include "cutlass/core_io.h"
#include "cutlass/util/host_tensor.h"
#include "cutlass/util/tensor_view_io.h"

#include "cutlass/util/reference/host/tensor_fill.h"
#include "cutlass/util/reference/host/tensor_compare.h"
#include "cutlass/util/reference/host/gemm.h"

#include "testbed.h"

///////////////////////////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////// Integer wmma.mma ////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////////////////
// TODO: FIXME SM75 should SM72, but the compilation breaks as SM72 shows up and runs on VOLTA
TEST(SM75_warp_wmma_row_col_s8, 16x16x16_16x16x16_16x16x16) {
  // Threadblock and warp with just one native WMMA operation (most basic unit test)
  using WarpShape = cutlass::gemm::GemmShape<16, 16, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 16, 16>;
  using ElementA = int8_t;
  using ElementB = int8_t;
  using ElementC = int32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using LayoutB = cutlass::layout::ColumnMajor;
  using LayoutC = cutlass::layout::RowMajor;

  using WmmaTensorOp = typename cutlass::gemm::warp::DefaultMmaTensorOpWmma<
    WarpShape, 
    InstructionShape, 
    ElementA, LayoutA, 
    ElementB, LayoutB, 
    ElementC, LayoutC>::Type;

  test::gemm::warp::Testbed<WmmaTensorOp, cutlass::gemm::GemmShape<16, 16, 16> >().run();
}

TEST(SM75_warp_wmma_row_col_s8, 32x8x16_32x8x16_32x8x16) {
  // Threadblock and warp with just one native WMMA operation (most basic unit test)
  using WarpShape = cutlass::gemm::GemmShape<32, 8, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<32, 8, 16>;
  using ElementA = int8_t;
  using ElementB = int8_t;
  using ElementC = int32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using LayoutB = cutlass::layout::ColumnMajor;
  using LayoutC = cutlass::layout::RowMajor;

  using WmmaTensorOp = typename cutlass::gemm::warp::DefaultMmaTensorOpWmma<
    WarpShape, 
    InstructionShape, 
    ElementA, LayoutA, 
    ElementB, LayoutB, 
    ElementC, LayoutC>::Type;

  test::gemm::warp::Testbed<WmmaTensorOp, cutlass::gemm::GemmShape<32, 8, 16> >().run();
}

TEST(SM75_warp_wmma_row_col_s8, 8x32x16_8x32x16_8x32x16) {
  // Threadblock and warp with just one native WMMA operation (most basic unit test)
  using WarpShape = cutlass::gemm::GemmShape<8, 32, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<8, 32, 16>;
  using ElementA = int8_t;
  using ElementB = int8_t;
  using ElementC = int32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using LayoutB = cutlass::layout::ColumnMajor;
  using LayoutC = cutlass::layout::RowMajor;

  using WmmaTensorOp = typename cutlass::gemm::warp::DefaultMmaTensorOpWmma<
    WarpShape, 
    InstructionShape, 
    ElementA, LayoutA, 
    ElementB, LayoutB, 
    ElementC, LayoutC>::Type;

  test::gemm::warp::Testbed<WmmaTensorOp, cutlass::gemm::GemmShape<8, 32, 16> >().run();
}

TEST(SM75_warp_wmma_row_col_u8, 16x16x16_16x16x16_16x16x16) {
  // Threadblock and warp with just one native WMMA operation (most basic unit test)
  using WarpShape = cutlass::gemm::GemmShape<16, 16, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 16, 16>;
  using ElementA = uint8_t;
  using ElementB = uint8_t;
  using ElementC = int32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using LayoutB = cutlass::layout::ColumnMajor;
  using LayoutC = cutlass::layout::RowMajor;

  using WmmaTensorOp = typename cutlass::gemm::warp::DefaultMmaTensorOpWmma<
    WarpShape, 
    InstructionShape, 
    ElementA, LayoutA, 
    ElementB, LayoutB, 
    ElementC, LayoutC>::Type;

  test::gemm::warp::Testbed<WmmaTensorOp, cutlass::gemm::GemmShape<16, 16, 16> >().run();
}

TEST(SM75_warp_wmma_row_col_u8, 32x8x16_32x8x16_32x8x16) {
  // Threadblock and warp with just one native WMMA operation (most basic unit test)
  using WarpShape = cutlass::gemm::GemmShape<32, 8, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<32, 8, 16>;
  using ElementA = uint8_t;
  using ElementB = uint8_t;
  using ElementC = int32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using LayoutB = cutlass::layout::ColumnMajor;
  using LayoutC = cutlass::layout::RowMajor;

  using WmmaTensorOp = typename cutlass::gemm::warp::DefaultMmaTensorOpWmma<
    WarpShape, 
    InstructionShape, 
    ElementA, LayoutA, 
    ElementB, LayoutB, 
    ElementC, LayoutC>::Type;

  test::gemm::warp::Testbed<WmmaTensorOp, cutlass::gemm::GemmShape<32, 8, 16> >().run();
}

TEST(SM75_warp_wmma_row_col_u8, 8x32x16_8x32x16_8x32x16) {
  // Threadblock and warp with just one native WMMA operation (most basic unit test)
  using WarpShape = cutlass::gemm::GemmShape<8, 32, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<8, 32, 16>;
  using ElementA = uint8_t;
  using ElementB = uint8_t;
  using ElementC = int32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using LayoutB = cutlass::layout::ColumnMajor;
  using LayoutC = cutlass::layout::RowMajor;

  using WmmaTensorOp = typename cutlass::gemm::warp::DefaultMmaTensorOpWmma<
    WarpShape, 
    InstructionShape, 
    ElementA, LayoutA, 
    ElementB, LayoutB, 
    ElementC, LayoutC>::Type;

  test::gemm::warp::Testbed<WmmaTensorOp, cutlass::gemm::GemmShape<8, 32, 16> >().run();
}
#endif //CUTLASS_ARCH_WMMA_SM72_ENABLED