/***************************************************************************************************
 * Copyright (c) 2017-2020, NVIDIA CORPORATION.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification, are permitted
 * provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright notice, this list of
 *       conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright notice, this list of
 *       conditions and the following disclaimer in the documentation and/or other materials
 *       provided with the distribution.
 *     * Neither the name of the NVIDIA CORPORATION nor the names of its contributors may be used
 *       to endorse or promote products derived from this software without specific prior written
 *       permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TOR (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 **************************************************************************************************/

/**
*/

#include <algorithm>
#include <iostream>

#include "cutlass/cutlass.h"
#include "cutlass/gemm/device/gemm.h"
#include "cutlass/epilogue/thread/linear_combination_relu.h"
#include "cutlass/util/host_tensor.h"
#include "cutlass/util/reference/device/gemm.h"
#include "cutlass/util/reference/host/tensor_compare.h"
#include "cutlass/util/reference/host/tensor_copy.h"
#include "cutlass/util/reference/host/tensor_fill.h"
#include "cutlass/util/tensor_view_io.h"
#include "helper.h"

// The code section below describes datatype for input, output matrices and computation between
// elements in input matrices.
using ElementAccumulator = float;                   // <- data type of accumulator
using ElementComputeEpilogue = ElementAccumulator;  // <- data type of epilogue operations
using ElementInputA = cutlass::half_t;              // <- data type of elements in input matrix A
using ElementInputB = cutlass::half_t;              // <- data type of elements in input matrix B
using ElementOutput = float;                        // <- data type of elements in output matrix D

// The code section below describes matrix layout of input and output matrices. Column Major for
// Matrix A, Row Major for Matrix B and Row Major for Matrix C
using LayoutInputA = cutlass::layout::ColumnMajor;
using LayoutInputB = cutlass::layout::ColumnMajor;
using LayoutOutput = cutlass::layout::RowMajor;

// This code section describes whether you want to use tensor cores or regular SIMT cores on GPU SM
using MMAOp = cutlass::arch::OpClassTensorOp;

// This code section describes CUDA SM architecture number
using SmArch = cutlass::arch::Sm75;

// This code section describes the tile size a thread block will compute
using ShapeMMAThreadBlock =
    cutlass::gemm::GemmShape<128, 128, 32>;  // <- threadblock tile M = 128, N = 128, K = 32
// This code section describes tile size a warp will compute
using ShapeMMAWarp = cutlass::gemm::GemmShape<64, 64, 32>;  // <- warp tile M = 64, N = 64, K = 32 
// This code section describes the size of MMA op
using ShapeMMAOp = cutlass::gemm::GemmShape<16, 8, 8>;  // <- MMA Op tile M = 8, N = 8, K = 4

// This code section describes how threadblocks are scheduled on GPU
using SwizzleThreadBlock = cutlass::gemm::threadblock::GemmIdentityThreadblockSwizzle<>;  // <- ??

// Define the epilogue operation as LinearCombinationRelu. This is approximately equal to
//
//    d_ij = max(0, alpha * sum_k(a_ik * b_kj) + beta * c_ij )
//
using EpilogueOp = cutlass::epilogue::thread::LinearCombinationRelu<
    ElementOutput,                                     // <- data type of output matrix
    128 / cutlass::sizeof_bits<ElementOutput>::value,  // <- this is the number of elements per
                                                       // vectorized memory access. For half
                                                       // precision, it's 8 elements. This becomes
                                                       // the vector width of math instructions in
                                                       // epilogue too
    ElementAccumulator,                                // <- data type of accumulator
    ElementComputeEpilogue>;  // <- data type for alpha/beta in linear combination function

// Number of pipelines you want to use
constexpr int NumStages = 2;

using Gemm = cutlass::gemm::device::Gemm<ElementInputA,
                                         LayoutInputA,
                                         ElementInputB,
                                         LayoutInputB,
                                         ElementOutput,
                                         LayoutOutput,
                                         ElementAccumulator,
                                         MMAOp,
                                         SmArch,
                                         ShapeMMAThreadBlock,
                                         ShapeMMAWarp,
                                         ShapeMMAOp,
                                         EpilogueOp,
                                         SwizzleThreadBlock,
                                         NumStages>;

int run() {

  cudaDeviceProp props;

  cudaError_t error = cudaGetDeviceProperties(&props, 0);
  if (error != cudaSuccess) {
    std::cerr << "cudaGetDeviceProperties() returned an error: " << cudaGetErrorString(error) << std::endl;
    return -1;
  }

  if (!(props.major * 10 + props.minor >= 75)) {
    std::cerr << "Turing Tensor Ops must be run on a machine with compute capability at least 75."
              << std::endl;
    // Returning zero so this test passes on older Toolkits. Its actions are no-op.
    return 0;
  }

  const int length_m = 5120;
  const int length_n = 4096;
  const int length_k = 4096;

  // Create a tuple of problem size for matrix multiplication
  cutlass::gemm::GemmCoord problem_size(length_m, length_n, length_k);

  // Initialize tensors using CUTLASS helper functions
  cutlass::HostTensor<ElementInputA, LayoutInputA> tensor_a(
      problem_size.mk());  // <- Create matrix A with dimensions M x K
  cutlass::HostTensor<ElementInputB, LayoutInputB> tensor_b(
      problem_size.kn());  // <- Create matrix B with dimensions K x N

  cutlass::HostTensor<ElementOutput, LayoutOutput> tensor_c_bias(
      {problem_size.m(), 1});  // <- Create matrix C with dimensions M x 1

  cutlass::HostTensor<ElementOutput, LayoutOutput> tensor_d(
      problem_size.mn());  // <- Create matrix D with dimensions M x N used to store output from
                           // CUTLASS kernel
  cutlass::HostTensor<ElementOutput, LayoutOutput> tensor_ref_d(
      problem_size.mn());  // <- Create matrix D with dimensions M x N used to store output from
                           // reference kernel

  // Fill input and output matrices on host using CUTLASS helper functions
  cutlass::reference::host::TensorFillRandomUniform(
      tensor_a.host_view(),
      1,
      ElementInputA(4),
      ElementInputA(-4),
      0);  // <- Fill matrix A on host with uniform-distribution random data
  cutlass::reference::host::TensorFillRandomUniform(
      tensor_b.host_view(),
      1,
      ElementInputB(4),
      ElementInputB(-4),
      0);  // <- Fill matrix B on host with uniform-distribution random data
  cutlass::reference::host::TensorFillRandomUniform(
      tensor_c_bias.host_view(),
      1,
      ElementOutput(4),
      ElementOutput(-4),
      0);  // <- Fill matrix C on host with uniform-distribution random data
  cutlass::reference::host::TensorFill(
      tensor_d.host_view());  // <- fill matrix D on host with zeros
  cutlass::reference::host::TensorFill(
      tensor_ref_d.host_view());  // <- fill matrix D for reference on host with zeros

  // Copy data from host to GPU
  tensor_a.sync_device();
  tensor_b.sync_device();
  tensor_c_bias.sync_device();
  tensor_d.sync_device();
  tensor_ref_d.sync_device();

  // Initialize alpha and beta for dot product computation
  ElementComputeEpilogue alpha = ElementComputeEpilogue(1);
  ElementComputeEpilogue beta = ElementComputeEpilogue(0);

  // Split K dimension into 1 partitions
  int split_k_slices = 1;

  // Create a tuple of gemm kernel arguments. This is later passed as arguments to launch
  // instantiated CUTLASS kernel
  typename Gemm::Arguments arguments{
    problem_size,                       // <- problem size of matrix multiplication
    tensor_a.device_ref(),              // <- reference to matrix A on device
    tensor_b.device_ref(),              // <- reference to matrix B on device

    {tensor_c_bias.device_data(), 0},   // <- the C matrix is treated as the bias vector. We can enable the GEMM
                                        //    to project away the N dimension by setting the stride to zero.

    tensor_d.device_ref(),              // <- reference to matrix D on device
    {alpha, beta},                      // <- tuple of alpha and beta
    split_k_slices};                    // <- k-dimension split factor

  // Using the arguments, query for extra workspace required for matrix multiplication computation
  size_t workspace_size = Gemm::get_workspace_size(arguments);

  // Allocate workspace memory
  cutlass::device_memory::allocation<uint8_t> workspace(workspace_size);

  // Instantiate CUTLASS kernel depending on templates
  Gemm gemm_op;

  // Initialize CUTLASS kernel with arguments and workspace pointer
  cutlass::Status status = gemm_op.initialize(arguments, workspace.get());
  CUTLASS_CHECK(status);

  // Launch initialized CUTLASS kernel
  status = gemm_op();
  CUTLASS_CHECK(status);

  //
  // Create instantiation for device reference gemm kernel
  //

  cutlass::reference::device::Gemm<ElementInputA,
                                   LayoutInputA,
                                   ElementInputB,
                                   LayoutInputB,
                                   ElementOutput,
                                   LayoutOutput,
                                   ElementComputeEpilogue,
                                   ElementComputeEpilogue>
      gemm_device_reference;

  // Launch device reference to compute strictly the product A * B
  gemm_device_reference(
    problem_size,
    alpha,
    tensor_a.device_ref(),
    tensor_b.device_ref(),
    0,
    tensor_ref_d.device_ref());

  // Wait for kernels to finish
  cudaDeviceSynchronize();

  // Copy output data from CUTLASS and reference kernel to host for comparison
  tensor_d.sync_host();
  tensor_ref_d.sync_host();

  // Compute bias + relu in host code
  for (int i = 0; i < problem_size.m(); ++i) {
    for (int j = 0; j < problem_size.n(); ++j) {
      tensor_ref_d.at({i, j}) = std::max(
        ElementOutput(0), 
        ElementOutput(tensor_ref_d.at({i, j}) + beta * tensor_c_bias.at({i, 0}))
      );
    }
  }

  // Check if output from CUTLASS kernel and reference kernel are equal or not
  std::cout << (cutlass::reference::host::TensorEquals(tensor_d.host_view(),
                                                       tensor_ref_d.host_view())
                    ? "Passed"
                    : "Failed")
            << std::endl;

  CUTLASS_CHECK(status);
  return 0;
}

int main() {
  // Turing Tensor Core operations exposed with mma.sync are first available in CUDA 10.2.
  //
  // CUTLASS must be compiled with CUDA 10.1 Toolkit to run these examples.
  if (!(__CUDACC_VER_MAJOR__ > 10 || (__CUDACC_VER_MAJOR__ == 10 && __CUDACC_VER_MINOR__ >= 2))) {
    std::cerr << "Turing Tensor Core operations must be compiled with CUDA 10.2 Toolkit or later." << std::endl;

    // Returning zero so this test passes on older Toolkits. Its actions are no-op.
    return 0;
  }
  else {
    return run();
  }
}