/***************************************************************************************************
 * Copyright (c) 2017-2020, NVIDIA CORPORATION.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification, are permitted
 * provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright notice, this list of
 *       conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright notice, this list of
 *       conditions and the following disclaimer in the documentation and/or other materials
 *       provided with the distribution.
 *     * Neither the name of the NVIDIA CORPORATION nor the names of its contributors may be used
 *       to endorse or promote products derived from this software without specific prior written
 *       permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TOR (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 **************************************************************************************************/
/*! \file
    \brief Unit tests for threadblock-level GEMM
*/

#include "mma_pipelined_testbed.h"

#if defined(CUTLASS_ARCH_MMA_SM80_SUPPORTED)

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_congruous, tensor_op_64x64x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::ColumnMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::RowMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(64, 64, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 1, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_congruous, tensor_op_128x64x16_64x32x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::ColumnMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::RowMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(128, 64, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<128, 64, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 32, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_congruous, tensor_op_64x128x16_32x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::ColumnMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::RowMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(64, 128, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<64, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<32, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_congruous, tensor_op_128x128x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::ColumnMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::RowMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(128, 128, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<128, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_congruous,
     multicta_256x256x96_128x128x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::ColumnMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::RowMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(256, 256, 96);

  using ThreadblockShape = cutlass::gemm::GemmShape<128, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(2, 2);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_congruous,
     multicta_512x256x192_256x128x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::ColumnMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::RowMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(512, 256, 192);

  using ThreadblockShape = cutlass::gemm::GemmShape<256, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(2, 2);
  dim3 block(32, 8, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_64x64x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(64, 64, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 1, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_32x32x16_16x16x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(32, 32, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<32, 32, 16>;
  using WarpShape = cutlass::gemm::GemmShape<16, 16, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_32x64x16_16x32x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(32, 64, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<32, 64, 16>;
  using WarpShape = cutlass::gemm::GemmShape<16, 32, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_64x32x16_32x16x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(64, 32, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<64, 32, 16>;
  using WarpShape = cutlass::gemm::GemmShape<32, 16, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC,
      cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_64x64x16_32x32x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(64, 64, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using WarpShape = cutlass::gemm::GemmShape<32, 32, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC, cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_128x64x16_64x32x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(128, 64, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<128, 64, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 32, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC, cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_64x128x16_32x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(64, 128, 64);

  using ThreadblockShape = cutlass::gemm::GemmShape<64, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<32, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC, cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise, tensor_op_128x128x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(128, 128, 48);

  using ThreadblockShape = cutlass::gemm::GemmShape<128, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC, cutlass::arch::OpClassTensorOp>;

  dim3 grid(1, 1);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise,
     multicta_256x256x48_128x128x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(256, 256, 48);

  using ThreadblockShape = cutlass::gemm::GemmShape<128, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC, cutlass::arch::OpClassTensorOp>;

  dim3 grid(2, 2);
  dim3 block(32, 4, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM80_gemm_threadblock_crosswise,
     multicta_512x256x192_256x128x16_64x64x16_16x8x4) {
  using ElementA = cutlass::tfloat32_t;
  using LayoutA = cutlass::layout::RowMajor;
  using ElementB = cutlass::tfloat32_t;
  using LayoutB = cutlass::layout::ColumnMajor;
  using ElementC = float;
  using LayoutC = cutlass::layout::ColumnMajor;

  cutlass::gemm::GemmCoord problem_size(512, 256, 192);

  using ThreadblockShape = cutlass::gemm::GemmShape<256, 128, 16>;
  using WarpShape = cutlass::gemm::GemmShape<64, 64, 16>;
  using InstructionShape = cutlass::gemm::GemmShape<16, 8, 4>;

  float alpha = 1.f;
  float beta = 0.0f;

  // Define the MmaCore components
  using MmaCore = typename cutlass::gemm::threadblock::DefaultMmaCore<
      ThreadblockShape, WarpShape, InstructionShape, ElementA, LayoutA,
      ElementB, LayoutB, ElementC, LayoutC, cutlass::arch::OpClassTensorOp>;

  dim3 grid(2, 2);
  dim3 block(32, 8, 1);

  test::gemm::threadblock::Testbed<MmaCore>(problem_size.m(), problem_size.n(),
                                            problem_size.k(), alpha, beta)
      .run(grid, block);
}

////////////////////////////////////////////////////////////////////////////////

#endif // if defined(CUTLASS_ARCH_MMA_SM80_SUPPORTED)