# Copyright (c) 2017-2018, NVIDIA CORPORATION.  All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification, are permitted
# provided that the following conditions are met:
#     * Redistributions of source code must retain the above copyright notice, this list of
#       conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright notice, this list of
#       conditions and the following disclaimer in the documentation and/or other materials
#       provided with the distribution.
#     * Neither the name of the NVIDIA CORPORATION nor the names of its contributors may be used
#       to endorse or promote products derived from this software without specific prior written
#       permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TOR (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

cmake_minimum_required(VERSION 3.3.0)

set(CUTLASS_LANGUAGES CXX)

# CMake 3.9.0 has native support for CUDA without the need of the CUDA package. Use it!
if(WIN32 AND NOT ${CMAKE_VERSION} VERSION_LESS "3.9.0")
  list(APPEND CUTLASS_LANGUAGES CUDA)
  set(CUTLASS_NATIVE_CUDA TRUE)

  macro(cutlass_add_executable)
    add_executable(${ARGN})
  endmacro()
else()
  # FindCUDA fails to detect VS 2017 due to a changed directory format of the toolkits.
  # For this configuration we need CMake >= 3.9.0 to use the native CUDA support.
  if (WIN32 AND MSVC_VERSION GREATER 1800)
    message(FATAL_ERROR "Please upgrade CMake to version >= 3.9.0 to support Visual Studio 2017 or higher")
  endif()

  # Fall back to the FindCUDA version to create an executable with CUDA files
  macro(cutlass_add_executable)
    cuda_add_executable(${ARGN})
  endmacro()
endif()

project(CUTLASS ${CUTLASS_LANGUAGES})

# check if the configuration is supported
if( NOT CMAKE_SIZEOF_VOID_P EQUAL 8 )
    message(FATAL_ERROR "CUTLASS requires a 64-bit compiler!")
endif()

find_package(CUDA)
find_package(Doxygen QUIET)

# By default we want to build in Release mode to ensure that we're getting best performance
if (NOT (CMAKE_BUILD_TYPE OR CONFIGURATION_TYPES))
  set(CMAKE_BUILD_TYPE Release CACHE STRING "Choose build level" FORCE)
  # We do support Debug or Release builds
  set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release")
endif()

if(WIN32)
  # On Windows we link against the shared (DLL) runtime. Change gtest settings to match this.
  set(gtest_force_shared_crt ON CACHE BOOL "Use shared (DLL) run-time lib even when Google Test is built as static lib" FORCE)
endif()

if (WIN32)
  # Enable more warnings and treat as errors
  string(APPEND NVCC_FLAGS " -Xcompiler /W3 -Xcompiler /WX")

  # Disable excess x86 floating point precision that can lead to results being labeled incorrectly
  string(APPEND NVCC_FLAGS " -Xcompiler /fp:strict")

  # Verbose option
  if (${CUTLASS_NVCC_VERBOSE})
      string(APPEND NVCC_FLAGS " -v")
  endif()
endif(WIN32)

# Configure CUDA options
set(CUTLASS_NVCC_ARCHS             "50;60;61;70"  CACHE STRING "The SM architectures to build code for.")
set(CUTLASS_NVCC_KEEP              OFF            CACHE BOOL "Keep intermediate files generated by NVCC.")

foreach(ARCH ${CUTLASS_NVCC_ARCHS})
  string(APPEND NVCC_FLAGS " -gencode arch=compute_${ARCH},code=sm_${ARCH}")
endforeach()


if (CUTLASS_NVCC_KEEP)
    string(APPEND NVCC_FLAGS " -keep")
endif()

if (WIN32 AND CUTLASS_NATIVE_CUDA)
  string(APPEND NVCC_FLAGS_RELEASE " -lineinfo")
else()
  string(APPEND NVCC_FLAGS " -lineinfo")
endif()

if (UNIX)
  string(APPEND NVCC_FLAGS " -Xcompiler -Wconversion")
endif()

string(APPEND NVCC_FLAGS_DEBUG " -g")
string(APPEND NVCC_FLAGS_RELEASE " -O3")

# define NDEBUG for release mode to disable assertions
string(APPEND NVCC_FLAGS_RELEASE " -DNDEBUG")

if (CUTLASS_NATIVE_CUDA)
  set(CMAKE_CUDA_FLAGS "${NVCC_FLAGS}")
  set(CMAKE_CUDA_FLAGS_DEBUG "${NVCC_FLAGS_DEBUG}")
  set(CMAKE_CUDA_FLAGS_RELEASE "${NVCC_FLAGS_RELEASE}")
else()
  set(CUDA_NVCC_FLAGS ${NVCC_FLAGS})
  set(CUDA_NVCC_FLAGS_DEBUG ${NVCC_FLAGS_DEBUG})
  set(CUDA_NVCC_FLAGS_RELEASE ${NVCC_FLAGS_RELEASE})
endif()

#
# The following items should eventually be pushed into cutlass/CMakeLists.txt
#

# GLOB for CUTLASS header files. Should we use a static list instead?
file(GLOB CUTLASS_GEMM RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} cutlass/gemm/*.h)
file(GLOB CUTLASS_UTIL RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} cutlass/util/*.h)
file(GLOB CUTLASS_DEVICE RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} cutlass/device/*.h)
file(GLOB CUTLASS_CORE RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} cutlass/*.h)

source_group("cutlass\\gemm" FILES ${CUTLASS_GEMM})
source_group("cutlass\\util" FILES ${CUTLASS_UTIL})
source_group("cutlass\\device" FILES ${CUTLASS_DEVICE})
source_group("cutlass" FILES ${CUTLASS_CORE})

add_library(CUTLASS INTERFACE)
include_directories("${CMAKE_CURRENT_SOURCE_DIR}")
target_sources(CUTLASS INTERFACE
  ${CUTLASS_GEMM}
  ${CUTLASS_UTIL}
  ${CUTLASS_DEVICE}
  ${CUTLASS_CORE}
)

target_include_directories(CUTLASS INTERFACE ${CMAKE_CURRENT_SOURCE_DIR})

# Create a custom target to ensure that the CUTLASS sources are visible in an IDE
add_custom_target(cutlass_ide SOURCES
  ${CUTLASS_GEMM}
  ${CUTLASS_UTIL}
  ${CUTLASS_DEVICE}
  ${CUTLASS_CORE}
)
# Doxygen is available. Generate documentation
if (DOXYGEN_FOUND)
    # DOT is available. Enable graph generation in the documentation
    if (DOXYGEN_DOT_EXECUTABLE)
        set(CUTLASS_ENABLE_DOXYGEN_DOT              ON            CACHE BOOL "Use dot to generate graphs in the doxygen documentation.")
    else()
        set(CUTLASS_ENABLE_DOXYGEN_DOT              OFF            CACHE BOOL "Use dot to generate graphs in the doxygen documentation." FORCE)
    endif()

    if (CUTLASS_ENABLE_DOXYGEN_DOT)
        set(HAVE_DOT "YES")
    else()
        set(HAVE_DOT "NO")
    endif()

    # Add custom target for Doxygen.
    add_custom_target(cutlass_docs ${CMAKE_COMMAND} -E env
        "DOT_PATH=${DOXYGEN_DOT_EXECUTABLE}"
        "HAVE_DOT=${HAVE_DOT}"
        ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile
        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
        VERBATIM
    )
endif()


#add_subdirectory(examples/gemm)
add_subdirectory(tools)